/******************************************************************************************************** ** DP1902 MFXXGD FLANGE IO����ͷ�ļ� ** ** Copyright (c) Siargo, Ltd. 2011 ** All Rights Reserved. ** **------------------------------------------------------------------------------------------------------- ********************************************************************************************************/ //#ifndef __DP1703_TFS7306_M0_V10_Flange_h__ //#define __DP1703_TFS7306_M0_V10_Flange_h__ #ifndef __MACRO_FLANGE_H__ #define __MACRO_FLANGE_H__ //==============================================16================================ #define PROGRAM_I2C_DEBUG 1 //============================================================================== #define PRODUCT_MOD "FS5001-H2" #define VER_MV 2 #define VER_SV 0 #define VER_RV 2 #define VER_BV 5 #define BUILD_MV "20250901" //build日期 #define VERSION "2025.250901" //软件版本 //#define SOFT_VERSION 2025 //软件版本 /******************************************************************************* *******************************************************************************/ // Microcontroller operating frequency #define FREQ 4000000//((8000000/32768))*32768 // system frequency definition #define TIMER_FREQ 32768 #define ACLK_DIV DIVA__1 #define SMCLK_DIV DIVS__2 #define MCLK_DIV DIVM__1 //****************************************************************************** // Function selection //****************************************************************************** //****************************************************************************** #define DP0000_FS5001_H2 0 #define DP2201_M0CONTROL 1 //****************************************************************************** #define ENABLE_DCOEF 1 //? #define ENABLE_LOWPOWER_MODE 1 //------------------------------------------------------------------------------ #define ENABLE_TURN_OFF_RH_TEST 1 //? #define ENABLE_AUTO_CALIB_ATYPE_OFFSET 1 //? //------------------------------------------------------------------------------ // for ACC Compute #define REC_ACC_PER 1 // Acc flowrate save enable bit #define ENABLE_ACCPULSE 1 // ���岻�ܺ������㲥ͬʱʹ�� #define ENABLE_PULSE_USE_CALIB_SETUP 0 //------------------------------------------------------------------------------ // For data storage #define REC_ALARM_DATA 1 // for alarm data save enable bit #define REC_DATE_DATA 1 // for date acc data save enable bit #define REC_HISTORY_DATA 1 // for history data save enable bit //------------------------------------------------------------------------------ // For Display #define ENABLE_USE_GDT0136 0 #define ENABLE_EMD779103D 0 // if ENABLE_EMD779103D = 1, ENABLE_EMD779106D = 0 #define ENABLE_EMD779106D 0 #define ENABLE_EDC20063HDC1P4 0 #define ENABLE_EDC20021HDC1P8 0 #define ENABLE_USE_EDM7791 (ENABLE_EMD779103D | ENABLE_EMD779106D) #define ENABLE_EDM7791_ALL (ENABLE_EMD779103D & ENABLE_EMD779106D) #define ENABLE_LCD_DISPLAY (ENABLE_USE_EDM7791 | ENABLE_USE_GDT0136 |ENABLE_EDC20063HDC1P4 | ENABLE_EDC20021HDC1P8) // for GDT0136 LCD #define ENABLE_DISPLAY_FR_FLAG 0 #define ENABLE_DISPLAY_ACC 0 //------------------------------------------------------------------------------ // For KEY SETUP #define ENABLE_KEY 0 #define ENABLE_KEY_FUNCTION (ENABLE_KEY & ENABLE_LCD_DISPLAY) // for Key Operation #define ENABLE_ALTERNATE_DISPLAY 0 #define ENABLE_KEY_FOR_LCD_SWAP 0 #define ENABLE_KEY_FOR_FAST_OFFSET 0 #define ENABLE_KEY_FOR_BPS 0 #define ENABLE_KEY_FOR_OFFSET 0 #define ENABLE_KEY_FOR_OFFSET_NEED_PASSWORD 0 #define ENABLE_KEY_FOR_GCF 0 #define ENABLE_KEY_FOR_METERFACTOR 0 #define ENABLE_KEY_FOR_DCOEF 0 #define ENABLE_KEY_FOR_MAXFLOWRATE 0 #define ENABLE_KEY_FOR_RESPONSE 0 #define ENABLE_PLUG_IN_FLOWRATE 0 #define ENABLE_KEY_FOR_ACC_UNIT 0 #define ENABLE_KEY_FOR_FLOWRATE_UNIT 0 #define ENABLE_KEY_FOR_LANGUAGE 0 #define ENABLE_KEY_FOR_PULSE 0 #define ENABLE_KEY_FOR_ALARM_FR 0 #define ENABLE_KEY_FOR_PASSWORD 0 #define ENABLE_KEY_FOR_CLR_ACC 0 #define ENABLE_KEY_FOR_RESET_DCOEF 0 //------------------------------------------------------------------------------ #define ENABLE_EXT_RTC 0 #define ENABLE_EXT_CRYSTAL 1 //------------------------------------------------------------------------------ // For pressure test #define ENABLE_USE_MS5837 0 #define ENABLE_PRESSURE ENABLE_USE_MS5837 #define ENABLE_PRESSURE_TEMPERATURE ENABLE_USE_MS5837 //------------------------------------------------------------------------------ // For 4-20mA Analog output #define ENABLE_USE_SPI2 0 #define ENABLE_USE_SPI2SOMI 0 #define ENABLE_USE_DACSOMI 0 #define ENABLE_USE_DAC8760 0 #define ENABLE_USE_AD5420 0 #define ENABLE_4_20MA_OUTPUT (ENABLE_USE_DAC8760 | ENABLE_USE_AD5420) #define ENABLE_4_20MA_ALL (ENABLE_USE_DAC8760 & ENABLE_USE_AD5420) //------------------------------------------------------------------------------ // for sampling flowrate #define ENABLE_USE_DAC8550 0 //------------------------------------------------------------------------------ // For User UART & I2C #define ENABLE_USER_I2C 0 #define ENABLE_USER_UART 1 #define ENABLE_TXD_USE_DMA 0 #define ENABLE_USE_TXD_EN 0 #define ENABLE_TURN_OFF_RS485 0 #define ENABLE_DIGITAL_OUTPUT 0 #define ENABLE_FACTORY_PROTOCOL 0 //------------------------------------------------------------------------------ // for bluetooth beacon mode #define BLUETOOTH_MODE 0 #define ENABLE_BLUETOOTH_BEACON (BLUETOOTH_MODE & (!ENABLE_ACCPULSE)) //------------------------------------------------------------------------------ #define ENABLE_NBIOT 0 //------------------------------------------------------------------------------ #define ENABLE_RF_UART (ENABLE_NBIOT | ENABLE_BLUETOOTH_BEACON) // RF Uart: NBIOT, Blue #define ENABLE_RF_RX 0 #define ENABLE_AUTO_FOR_RF_TX 0 // for : INTER-NBIOT MOD #define ENABLE_AUTO_USER_UART_TX 0 #define ENABLE_ERROR_USE_RF_TXDPIN 0 #define ENABLE_ERROR_PIN_FOR_VALVE_CONTROL 0 #define ENABLE_LEAK_DETECT 0 #define ENABLE_AT_FOR_MASTER_UART (ENABLE_RF_UART) #define ENABLE_DENSITY_DETECT 0 #define ENABLE_ACC_GAIN 0 //------------------------------------------------------------------------------ // FOR D6V2 #define ENABLE_USE_ATYPE_DCP 0 #define ENABLE_USE_CTYPE_DCP 0 #define POT_INC_AND_VALUE_DEC 0 #define ENABLE_ATYPE_ALARM 0 // ONLY SELECT ONE #define ENABLE_USE_MCP4531 0 #define ENABLE_USE_CAT5171 1 #define ENABLE_USE_TPL0501 0 // RH Contol circuit #define ENABLE_RATIO_HIGH 0 //------------------------------------------------------------------------------ // For A-Type FlowRate Compute #define ENABLE_A_TYPE_FLOWRATE 0 #define ENABLE_PLUG_IN_FLOWRATE 0 //------------------------------------------------------------------------------ // For Temperature test #define ENABLE_USE_MCP9808 1 //------------------------------------------------------------------------------ // For Temperature correction #define ENABLE_OFFSET_TRACK 0 //track���� #define ENABLE_OFFSET_CORRECT 1 //ƫ������ #define ENABLE_AUTO_ZERO_TRACK 0 #define ENABLE_TD_TU_SWITCH_CONTROL 0 #define ENABLE_MULTI_PONIT_TA_CORR 1 // For D9V2 if TEMP_CORR_USE_TA = 0 & TEMP_CORR_USE_RR = 0, use TGAS #define TEMP_CORR_USE_TA 0 // TPCB #define TEMP_CORR_USE_RR 0 //------------------------------------------------------------------------------ #define ENABLE_GAS_RECOGNITION 1 #define ENABLE_GAS_RECOGNITION_TABLE 1 #define ENABLE_RR_CALIBRATION ENABLE_GAS_RECOGNITION #define ENABLE_ONE_TABLE 0 #define ENABLE_ONE_TABLE_NAME INTCMD_1ST_TABLE //------------------------------------------------------------------------------ // for calibration data У׼������������ #define ENABLE_ONE_CURVE 1 #define ENABLE_2ND_CURVE 0 #define ENABLE_3RD_CURVE 0 //------------------------------------------------------------------------------ #define ENABLE_HALT_IN_OPERATE_CURVE 1 //------------------------------------------------------------------------------ // For ADC Calibration #define ENABLE_CALIB_ATYPE_ADC 0 //------------------------------------------------------------------------------ #define ENABLE_EXTPOWER_DETECT 0 #define DISABLE_BAT_ALARM_IN_EXPOWER 0 #define DISABLE_BAT_ALARM 1 #define ENABLE_DEBUG_PIN 0 // if Not��use for RF Control pin #define ENABLE_ZERO_CALIB 1 #define ENABLE_ZERO_CALIB_PIN 0 // if Not��use for RF Control pin #define ENABLE_ZERO_CALIB_CMD 1 #define ENABLE_CALPIN_FOR_UPDATE_FR 1 //------------------------------------------------------------------------------ // for internal modbus #define ENABLE_READ_CODE_INTO_CALIB 0 //------------------------------------------------------------------------------ // for SELECT BAT #define ENABLE_BAT_SEL_PIN 0 // use for RF Control pin //------------------------------------------------------------------------------ // FOR FLOWRATE UNIT #define ENABLE_SCCM_SL 0 #define ENABLE_SLPM_NM3 1 #define ENABLE_NCMH_NM3 1 #define ENABLE_SCFM_SCF 0 #define ENABLE_PPM_PPM 0 #define ENABLE_KGH_KG 0 #define ENABLE_SLPM_SL 0 #define ENABLE_SCFH_SCF 1 #define ENABLE_FIXED_UART_FR 0 #define WORK_UNIT_DEFAULT NCMH_NM3 // SCFH_SCF #define FR_STD_UNIT SLPM // NCMH //------------------------------------------------------------------------------ #define ACC_INT_8BIT 1 #define ACC_INT_7BIT 0 #define ACC_INT_6BIT (ENABLE_USE_GDT0136 | ENABLE_EDC20021HDC1P8) #define ENABLE_ACC_DEC_COMPUTE 0 //------------------------------------------------------------------------------ #define ENABLE_SAMPLE_GREATER_GAIN 1 //------------------------------------------------------------------------------ #define ENABLE_FLOW_GAIN 1 #define FLOW_GAIN_DEFAULT 100 #define FLOW_GAIN_MAX 1000 //------------------------------------------------------------------------------ // for user protocol #define ENABLE_USER_WP 1 // Write protect #define ENABLE_USER_GCF 1 #define ENABLE_USER_OFFSET 1 #define ENABLE_USER_WRITE_ACC 1 #define ENABLE_USER_RESET_CORR 1 #define ENABLE_USER_SET_UNIT 1 #define ENABLE_ALARM_ACC 0 //------------------------------------------------------------------------------ #define ENABLE_ADJUST_ADC_GAIN 1 //****************************************************************************** #define TURN_OFF_SYSTEM 245 // 2.45V //****************************************************************************** // Parameter default //****************************************************************************** // FOR MODBUS Define // MODBUS Operation password #define COM_PASSWORD1 0x53495244 //0x53495244 "SIRD" #define COM_PASSWORD2 0x32303133 #define COM_PASSWORD3 0x53494152 // for MODBUS Default #define MAP1_DEFAULT STD_PROTOCOL #define MAP2_DEFAULT STD_SLAVER_ID #define MAP3_DEFAULT STD_FLOWRATE #define MAP4_DEFAULT (STD_FLOWRATE+1) #define MAP5_DEFAULT STD_ACC_INT #define MAP6_DEFAULT (STD_ACC_INT+1) #define MAP7_DEFAULT STD_ACC_DOT #define MAP8_DEFAULT (STD_METER_SN) #define MAP9_DEFAULT (STD_METER_SN+1) #define MAP10_DEFAULT (STD_METER_SN+2) #define MAP11_DEFAULT (STD_METER_SN+3) #define MAP12_DEFAULT (STD_METER_SN+4) #define MAP13_DEFAULT (STD_METER_SN+5) #define MAP14_DEFAULT STD_ALARM_1 #define MAP15_DEFAULT STD_BAT1_V #define MAP16_DEFAULT STD_OUT_FR_MAX #define MAP17_DEFAULT (STD_OUT_FR_MAX+1) #define MAP18_DEFAULT STD_OUT_FR_MAX #define MAP19_DEFAULT (STD_OUT_FR_MAX+1) #define MAP20_DEFAULT STD_GAS_OFFSET_C #define MAP21_DEFAULT STD_GAS_OFFSET_A #define MAP22_DEFAULT STD_TA #define MAP23_DEFAULT STD_TGAS #define MAP24_DEFAULT STD_GAS_FACTOR #define MAP25_DEFAULT STD_AIR_FACTOR #define MAP26_DEFAULT STD_FACTOR_VTH #define MAP27_DEFAULT 0 #define MAP28_DEFAULT 0 #define MAP29_DEFAULT 0 #define MAP30_DEFAULT 0 #define MAP31_DEFAULT 0 #define MAP32_DEFAULT 0 #define MAP33_DEFAULT 0 #define MAP34_DEFAULT 0 #define MAP35_DEFAULT 0 #define MAP36_DEFAULT 0 #define MAP37_DEFAULT 0 #define MAP38_DEFAULT 0 #define MAP39_DEFAULT 0 #define MAP40_DEFAULT 0 #define MAP41_DEFAULT 0 #define MAP42_DEFAULT 0 #define MAP43_DEFAULT 0 #define MAP44_DEFAULT 0 #define MAP45_DEFAULT 0 #define MAP46_DEFAULT 0 #define MAP47_DEFAULT 0 #define MAP48_DEFAULT 0 //------------------------------------------------------------------------------ // FOR AUTO TXD DATA #define TIMING_TXD_START_DEFAULT STD_METER_SN #define TIMING_TXD_LEN_DEFAULT (STD_BAT1_V - STD_METER_SN)+1 #define TIMING_TXD_TIME_DEFAULT 0 //------------------------------------------------------------------------------ #define DIS_LANGUAGE_DEFAULT CHINESE //------------------------------------------------------------------------------ #define KEY_PASSWORD_DEFAULT 11111 //****************************************************************************** //------------------------------------------------------------------------------ #define MAX_ALRAM_FR_DEFAULT 160 // 1.25*128 //------------------------------------------------------------------------------ // INSTRUMENT_FACTOR = 1 ERROR_CORRECT = 0 #define CORRECT_METHOD ERROR_CORRECT #define ENABLE_GCF_POWER_CORR 0 //------------------------------------------------------------------------------ #define METER_PARAMETER_STD 1000 #define METER_PARAMETER_DEFAULT 1000 #define METER_PARAMETER_MAX 6500 #define METER_PARAMETER_MIN 112 //------------------------------------------------------------------------------ #define GCF_PARAMETER_STD 1000 #define GCF_PARAMETER_MAX 5500 #define GCF_PARAMETER_MIN 250 #define GCF_ATYPE_DEFAULT 850 //------------------------------------------------------------------------------ #if(ENABLE_GCF_POWER_CORR) //------------------------------------------------------------------------------ #define GCF_DEFAULT 889 #define GCF_A_DEFAULT -46 #define GCF_C_DEFAULT 226 #define GCF_A_DOT 1000 #define GCF_B_DOT 1000 #define GCF_C_DOT 1000000 // for mm2 No dot bit //------------------------------------------------------------------------------ #else //------------------------------------------------------------------------------ #if(DP1902COREV0134) #define GCF_DEFAULT 850 #else #define GCF_DEFAULT 1030 #endif //---------------------------------------------------------------------------- #define GCF_A_DEFAULT 0 #define GCF_C_DEFAULT 0 #define GCF_A_DOT 10000000000 #define GCF_B_DOT 1000 #define GCF_C_DOT 10000 //------------------------------------------------------------------------------ #endif //------------------------------------------------------------------------------ #define TIMING_TXD_START_MAX STD_WRITE_START #define TIMING_TXD_START_MIN STD_REG_START #define TIMING_TXD_LEN_MAX 40 #define TIMING_TXD_LEN_MIN 1 #define TIMING_TXD_TIME_MAX 45000 // //------------------------------------------------------------------------------ #define SAMPLE_PERIOD_MAX RESP_4000MS #define SAMPLE_PERIOD_MIN RESP_125MS // RESP_500MS #define SAMPLE_PERIOD_DEFAULT RESP_125MS // RESP_4000MS #define EXT_POWER_PERIOD_TIME RESP_125MS // RESP_500MS //�ⲿ��Դ //------------------------------------------------------------------------------ #define RESPONSE_TIME_DEFAULT RESP_2000MS // 125, 250, 500, 1000, 2000, 4000 #define ENABLE_DISPLAY_FILTER 1 #define DISPLAY_FILTER_DEFAULT RESP_1000MS // 1S #define FLOWRATE_UPDATE_SCALE 18 // 50/1024= 5% #define FRINDEX_UPDATE_SCALE 8 // 50/1024= 5% //------------------------------------------------------------------------------ #define CALIB_PULSE_DEFAULT PULSE_1ML #define CALIB_PULSE_UNIT_MIN PULSE_1ML #define CALIB_PULSE_UNIT_MAX PULSE_1000L #define PULSE_LEVEL_DEFAULT LOW #define PULSE_UNIT_DEFAULT PULSE_1000L #define PULSE_UNIT_MIN PULSE_100ML #define PULSE_UNIT_MAX PULSE_1000L //for key setup #define PULSE_UNIT_INDEX_MIN PULSE_100ML_INDEX #define PULSE_UNIT_INDEX_MAX PULSE_1000L_INDEX //------------------------------------------------------------------------------ #define COM_DECIMAL_POINT_DEFAULT 3 //------------------------------------------------------------------------------ #define MAX_FR_DEFAULT 600000 #define MIN_FR_DEFAULT 0 #define CLIAB_STD_FR_GIAN 1 // ��ԭ��1000�Ļ����������� //------------------------------------------------------------------------------ #define ADC_GAIN_DEFAULT 32 //------------------------------------------------------------------------------ // for AType FlowRate Compute #define SDT_ZERO_OFFSET 20000 #define OFFSET_A_MAX 30000 #define OFFSET_A_MIN 10000 #define AUTO_OFFSET_NIDX 150 #define AUTO_OFFSET_NVHH 5000 #define SWITCH_FR_DEFAULT 20000 #define SWITCH_FR_INDEX_MAX 30000 #define SWITCH_FR_INDEX_MIN 1000 #define ATYPE_INDEX_GAIN_DEFAULT 30 #define ATYPE_INDEX_GAIN_MAX 100 #define ATYPE_INDEX_GAIN_MIN 10 //------------------------------------------------------------------------------ #define TEMPRETURE_OFFSET 10000 // 2bit #define FR_TEMPERATURE_DEAULT 2000 #define TEMPERATURE_K_STD 27315 #define FR_TEMPERATURE_STD 29315 // 273.15 + 20.00 //------------------------------------------------------------------------------ #define ENABLE_WRITE_TA_HIGH (TEMPRETURE_OFFSET+4750) #define ENABLE_WRITE_TA_LOW (TEMPRETURE_OFFSET+150) #define ENABLE_WRITE_TA_SCALE 150 // 1.5��C #define TEMP_FACTOR_MAX 50 // 0.005 #define TEMP_FACTOR_MIN 0 //-0.005 #define TEMP_FACTOR_DEFAULT 25 //-0.0025 //------------------------------------------------------------------------------ #define STATIC_LOW_TA_MAX 11000 // 10��C #define STATIC_LOW_TA_MIN 8000 // -20��C #define STATIC_HIGH_TA_MAX 17000 // 70��C #define STATIC_HIGH_TA_MIN 14000 // 40��C //------------------------------------------------------------------------------ #define TGAS_ALARM_MAX 17000 // 70��C #define TGAS_ALARM_MIN 5000 // -50��C //------------------------------------------------------------------------------ #define CALIB_TEMPRETURE_MAX 13500 #define CALIB_TEMPRETURE_MIN 11500 //------------------------------------------------------------------------------ #define ZERO_SUPPRESSION_DEFAULT 150 #define ZERO_SUPPRESSION_MAX 2000 #define ZERO_SUPPRESSION_MIN 0 //------------------------------------------------------------------------------ #define OFFSET_MAX 36768 #define OFFSET_MIN 28768 //------------------------------------------------------------------------------ #define REVERSE_SCALE_DEFAULT 3000 #define REVERSE_SCALE_MAX 16000 #define REVERSE_SCALE_MIN 300 //------------------------------------------------------------------------------ #define CURVE_DATA_MAX 36 #define TACURVE_NUM_DEFAULT 0 #define CURVE_NUM_MAX CURVE_DATA_MAX #define CURVE_NUM_MIN 0 #define ATYPECURVE_NUM_DEFAULT 0 #define ATYPECURVE_NUM_MAX CURVE_DATA_MAX #define ATYPECURVE_NUM_MIN 0 //------------------------------------------------------------------------------ #define RR_GAINRES_DEFAULT 7500 #define RR_GAINRES_MAX 62000 #define RR_GAINRES_MIN 10000 #define RR_OPGAIN_RES 33000.0 //------------------------------------------------------------------------------ #define VHH_AIR_PARA_DEFAULT 32768 #define VHH_AIR_PARA_MAX 50768 #define VHH_AIR_PARA_MIN 14768 #define VHH_PARA_SCALE_DEFAULT 1000 #define VHH_PARA_SCALE_MAX 10000 #define VHH_PARA_SCALE_MIN 100 //------------------------------------------------------------------------------ #define SLAVER_ADDR_DEFAULT 1 //------------------------------------------------------------------------------ #define HISTORY_PERIOD_DEFAULT 60 //------------------------------------------------------------------------------ #define BATTEST_PERIOD_DEFAULT 120 //------------------------------------------------------------------------------ #define RH_GAINRES_DEFAULT 25 //------------------------------------------------------------------------------ #define DAC8760 0 #define AD5420 1 #define SYS_LOOP_CHIP_DEFAULT DAC8760 #define SYS_LOOP_CHIP_MIN DAC8760 #define SYS_LOOP_CHIP_MAX AD5420 //------------------------------------------------------------------------------ #define EDM779106D 0 #define EDM779103D 1 #define SYS_LCD_DEFAULT EDM779106D #define SYS_LCD_MIN EDM779106D #define SYS_LCD_MAX EDM779103D //****************************************************************************** //#define DATA_COMP_FAC CALIB_COMP_FAC // compression factor for calibration data board code //#define CALIB_WIDTH 64 //固定宽度64字节 由于Flash每次最少写入4字节，对该值应当有限制 #define MAX_OPERATE_DEPTH (CALIB_DEPTH/CALIB_COMP_FAC) #define MAX_INDEX 8192 //MAX_OPERATE_DEPTH*CALIB_WIDTH #define MAX_SPACE ((CALIB_WIDTH/CALIB_COMP_FAC)*CALIB_DEPTH) #define CALI_DATA1_ADDR CALI_DATA_ADDR // for calibration VHH //#define DATA_COMP_FAC2 8 // compression factor for calibration data board code //#define CALIB_DEPTH2 720 //#define MAX_OPERATE_DEPTH2 (CALIB_DEPTH2/DATA_COMP_FAC2) //#define CALI_DATA2_ADDR 0x7000 //#define MAX_INDEX2 24000 // for calibration A Type FlowRate #define DATA_COMP_FAC3 6 // compression factor for calibration data board code #define CALIB_DEPTH3 720 #define MAX_OPERATE_DEPTH3 (CALIB_DEPTH3/DATA_COMP_FAC3) #define CALI_DATA3_ADDR (((MAX_SPACE + CALI_DATA1_ADDR) & 0xff00) + 0x0100) //#define CALI_DATA3_ADDR 0x7000 //0xA000 #define MAX_INDEX3 8192 #define INT_3RD_CURVE_CMD INTCMD_MICROFR_CURVE #define CTYPE_FR CURVE_1ST #define ATYPE_VH CURVE_2ND #define CTYPE_GAINX CURVE_3RD #define INT_2RD_CURVE_CMD INTCMD_ATYPE_CURVE #define INT_3RD_CURVE_CMD INTCMD_MICROFR_CURVE //============================================================================== //============================================================================== // LOW_POWER key intput interrupt, SW1=P1.5, SW3=P1.3 #define KEY_SEL P1SEL #define KEY_DIR P1DIR #define KEY_OUT P1OUT #define KEY_REN P1REN #define KEY_IN P1IN #define KEY_IES P1IES #define KEY_IFG P1IFG #define KEY_IE P1IE #define KEY_IV P1IV //#define KEY_PIN (BIT5+BIT6+BIT7) #define KEY_PIN (BIT4+BIT6+BIT7) #define FUN_KEY_VECTOR BIT6_VECTOR #define UPPER_KEY_VECTOR BIT7_VECTOR //#define SHIFT_KEY_VECTOR BIT5_VECTOR #define SHIFT_KEY_VECTOR BIT4_VECTOR #define KEY_VECTOR PORT1_VECTOR //-------------------------------------------------------------- #define KEY_PULLUP() (KEY_REN |= KEY_PIN) #define KEY_INPUT() (KEY_DIR &= ~KEY_PIN) #define SET_KEY() (KEY_OUT |= KEY_PIN) #define READ_KEY_VALUE() (KEY_IN & KEY_PIN) //-------------------------------------------------------------- #define FUN_KEY BIT6 #define UPPER_KEY BIT4 //BIT5 #define SHIFT_KEY BIT7 #define LONG_KEY 0x01 #define M_KEY FUN_KEY #define INC_KEY UPPER_KEY #define DEC_KEY SHIFT_KEY #define LONG_M_KEY (M_KEY + LONG_KEY) #define LONG_DEC_KEY (DEC_KEY + LONG_KEY) #define LONG_INC_KEY (INC_KEY + LONG_KEY) #define COMBO_KEY (INC_KEY + DEC_KEY) #define M_KEY_VECTOR FUN_KEY_VECTOR #define INC_KEY_VECTOR UPPER_KEY_VECTOR #define DEC_KEY_VECTOR SHIFT_KEY_VECTOR//-------------------------------------------------------------- //****************************************************************************** #endif