218 lines
6.8 KiB
C
Executable File
218 lines
6.8 KiB
C
Executable File
#include "../main/SystemInclude.h"
|
||
|
||
/* = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
|
||
|
||
USER_PARAMS_ADDR 参数数据保存区，对应EEPROM的 0x10-0x6C0 区间
|
||
参数页说明：将 u16 MBReg[336]; u16 WordReg[128]; u32 DWordReg[64];
|
||
总共 1712bytes 依次连续存储到USER_PARAMS_ADDR为起始地址的页;
|
||
|
||
CORRECT_DATA_ADDR 默认校准页保存区，对应EEPROM的 0x1000-及以后按照内码量设计的区间
|
||
|
||
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =*/
|
||
//写参数数据保存区-临时缓冲区
|
||
u8 param_buffer[TOTAL_PARAM_SIZE] __attribute__((aligned(4))); //4字节对齐
|
||
|
||
void update_param_bufferFromFlash(void)//
|
||
{
|
||
memcpy(param_buffer, (void*)USER_PARAMS_ADDR, TOTAL_PARAM_SIZE);
|
||
}
|
||
|
||
//写参数数据保存区-将临时缓冲区param_buffer数据存入flash ------------------
|
||
static void WriteAllParamToFlash(void)
|
||
{
|
||
//擦除 Flash 页（USER_PARAMS_ADDR 是页起始）
|
||
if(LHL_FLASH_Erase(USER_PARAMS_ADDR, USER_PARAMS_ADDR, LHL_LNG_TIMEOUT) != LHL_OK)
|
||
{
|
||
while(1);
|
||
}
|
||
//按 32-bit word 写入 必须 4-byte 对齐
|
||
u16 word_count = (TOTAL_PARAM_SIZE + 3)>>2; // 向上取整 转换为32位数据的个数
|
||
|
||
LHL_FLASH_Program( USER_PARAMS_ADDR, (uint32_t*)param_buffer, word_count, LHL_LNG_TIMEOUT );
|
||
}
|
||
|
||
|
||
//写参数数据保存区-双字节保存区
|
||
u16 WriteShortParameterToFlash(u16 parameterAdr)
|
||
{
|
||
//访问双字节数据保存区------------------------------------------------------------------
|
||
// if((parameterAdr >=REG_MEM_ADDR_START) && (parameterAdr < REG_INT_DWORD_MEM_ADDR_START))
|
||
// {}
|
||
u8 *p = param_buffer;
|
||
|
||
tempL.Byte[2] = CRC8(tempL.Byte, 2);//计算新值校验码
|
||
|
||
p += parameterAdr;
|
||
//更新变量
|
||
p[0] = tempL.Byte[0];
|
||
p[1] = tempL.Byte[1];
|
||
p[2] = tempL.Byte[2];
|
||
|
||
//写param_buffer到Flash
|
||
WriteAllParamToFlash();
|
||
|
||
tempL.Word[0] = ReadShortParameterFromFlash(parameterAdr,WordDefault[ADR_WORD_IDX(parameterAdr)][DEFAULT]);
|
||
tempL.Byte[2] = 0;
|
||
// 注意：此时不用更新 WordReg[index]
|
||
// 因为上层会用返回值来更新：*WRSource = 返回值;
|
||
return tempL.Word[0]; //上层会用此值更新 WordReg[I]
|
||
}
|
||
|
||
|
||
//写参数数据保存区-四字节保存区
|
||
u32 WriteLongParameterToFlash(u16 parameterAdr)
|
||
{
|
||
// if( (parameterAdr >=REG_INT_DWORD_MEM_ADDR_START)&& parameterAdr <= REG_INT_DWORD_MEM_ADDR_END)
|
||
// { }
|
||
tempDev.Byte[4] = CRC8(tempDev.Byte, 4);//计算新值校验码
|
||
|
||
//更新变量
|
||
u8 *p = param_buffer;
|
||
p += (parameterAdr );
|
||
p[0] = tempDev.Byte[0];
|
||
p[1] = tempDev.Byte[1];
|
||
p[2] = tempDev.Byte[2];
|
||
p[3] = tempDev.Byte[3];
|
||
p[4] = tempDev.Byte[4];
|
||
|
||
//写param_buffer到Flash
|
||
WriteAllParamToFlash();
|
||
|
||
tempDev.DWord[0] = ReadLongParameterFromFlash(parameterAdr,WordDefault[ADR_DWORD_IDX(parameterAdr)][DEFAULT]);
|
||
tempDev.Byte[4] = 0;
|
||
|
||
return tempDev.DWord[0];
|
||
}
|
||
|
||
|
||
|
||
//写校准页保存区 ,二次修正保存区 ,不定长参数数据保存区---------------------------------------------------
|
||
void WriteMultiByteToFlash(u16 address, u8 *wrtData, u16 dataLenth, u8 flashAdr)
|
||
{
|
||
(void)flashAdr; // 没有多个Flash
|
||
//默认校准曲线---------------------------------------------------------------
|
||
if(address >= CALI_DATA1_ADDR)//要写入的地址为原eeprom的校准区
|
||
{
|
||
//0.转换成Flash地址
|
||
u32 ADDR = (u32)(address - CALI_DATA1_ADDR);
|
||
ADDR = ADDR + CORRECT_DATA_ADDR;
|
||
//判断是否新一页，擦除新页准备写入
|
||
if((ADDR&0x0FFF) == 0x000) LHL_FLASH_Erase(ADDR,ADDR,LHL_LNG_TIMEOUT);//ADDR跨页即ADDR为页首地址
|
||
if(ADDR >(CORRECT_DATA_ADDR+ CALIB_STORED_SIZE) ) MBBuf.BusError = SLAVE_DEVICE_FAILURE;//溢出
|
||
//写校准进入Flash
|
||
LHL_FLASH_Program(ADDR,(u32 *)wrtData,dataLenth>>2 ,LHL_LNG_TIMEOUT);
|
||
}
|
||
//校准曲线2---------------------------------------------------------------
|
||
//CALI_DATA2_ADDR CORRECT_DATA2_ADDR CALIB_STORED_SIZE2
|
||
//校准曲线3---------------------------------------------------------------
|
||
//CALI_DATA3_ADDR CORRECT_DATA3_ADDR CALIB_STORED_SIZE3
|
||
//二次修正区---------------------------------------------------------------
|
||
// else if()
|
||
// {
|
||
// USER_DCOEF_TAG_ADDR
|
||
// }
|
||
//写入多个到参数数据保存区------------------------------------------------------------------
|
||
else if((address >=REG_MEMORY_ADDR) && (address <= REG_INT_DWORD_MEM_ADDR_END))
|
||
{
|
||
|
||
|
||
|
||
|
||
wrtData[dataLenth] = CRC8(wrtData, dataLenth);//计算新值校验码
|
||
//更新变量
|
||
u8 *p = param_buffer;
|
||
p += address;
|
||
/*for(u8 i = 0 ; i < dataLenth+1 ; i ++)
|
||
{
|
||
p[i] = wrtData[i];
|
||
}*/
|
||
//每两个字节交换
|
||
for (int i = 0; i < dataLenth; i += 2) {
|
||
p[i] = wrtData[i + 1]; //低地址
|
||
p[i + 1] = wrtData[i]; //高地址
|
||
}
|
||
p[dataLenth]= wrtData[dataLenth];//CRC直接复制
|
||
|
||
WriteAllParamToFlash();
|
||
}
|
||
|
||
|
||
}
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
//读双字节数据保存区------------------------------------------------------------------
|
||
u16 ReadShortParameterFromFlash(u16 parameterAdr , u16 parameterDefault)
|
||
{
|
||
// if(parameterAdr >=REG_MEM_ADDR_START && parameterAdr < REG_INT_DWORD_MEM_ADDR_START)
|
||
// { }
|
||
u32 ADDR = ((u32)parameterAdr + USER_PARAMS_ADDR);// 将EEPROM 参数地址（如 MEM_ADDR_REG_0X30 = 0x10）转为 Flash 物理地址
|
||
|
||
tempL.Word[0] = 0;
|
||
memcpy(tempL.Byte,(const void*)ADDR, 3);
|
||
|
||
if(tempL.Byte[2] != CRC8(tempL.Byte, 2))
|
||
{
|
||
tempL.Word[0] = (u32)parameterDefault;
|
||
isReadParameterOK = 0;
|
||
}
|
||
else
|
||
{
|
||
tempL.Byte[2] = 0;
|
||
isReadParameterOK = 1;
|
||
}
|
||
|
||
return tempL.Word[0];
|
||
|
||
}
|
||
//读四字节数据保存区------------------------------------------------------------------
|
||
u32 ReadLongParameterFromFlash(u16 parameterAdr , u16 parameterDefault)
|
||
{
|
||
// if( (parameterAdr >=REG_INT_DWORD_MEM_ADDR_START)&& parameterAdr <= REG_INT_DWORD_MEM_ADDR_END)
|
||
// { }
|
||
u32 ADDR = (u32)(parameterAdr + USER_PARAMS_ADDR);
|
||
tempDev.DWord[0] = 0;
|
||
memcpy(tempDev.Byte,(const void*)ADDR, 5);
|
||
|
||
if(tempDev.Byte[4] != CRC8(tempDev.Byte, 4))
|
||
{
|
||
tempDev.DWord[0] = (u32)parameterDefault;
|
||
isReadParameterOK = 0;
|
||
}
|
||
else
|
||
{
|
||
isReadParameterOK = 1;
|
||
}
|
||
return tempDev.DWord[0];
|
||
|
||
}
|
||
|
||
//读数据保存区,校准数据保存区------------------------------------------------------------------
|
||
void ReadMultiByteFromFlash(u16 address,u8 *wrtData, u16 dataLenth, u8 flashAdr)
|
||
{
|
||
(void)flashAdr; // 没有多个Flash,避免编译器 warning
|
||
u32 ADDR;
|
||
//读校准数据保存区--------------------------------------------------------
|
||
//由于校准数据地址基准为eeprom的地址，而所有的校准都在该地址后，因此只需要判断这一个即可
|
||
if(address >=CALI_DATA1_ADDR)
|
||
{
|
||
ADDR =(u32)(address-CALI_DATA1_ADDR );
|
||
ADDR += CORRECT_DATA_ADDR; //转换为Flash地址
|
||
memcpy(wrtData,(const void*)ADDR, dataLenth);
|
||
}
|
||
//读数据保存区----------------------------------------------------------
|
||
else if((address >=REG_MEMORY_ADDR) && (address <= REG_INT_DWORD_MEM_ADDR_END))
|
||
{
|
||
ADDR =((u32)address + USER_PARAMS_ADDR);
|
||
memcpy(wrtData,(const void*)ADDR, dataLenth); //不定长参数的校验位是存了的，若判断但是默认值=？未判断
|
||
}
|
||
}
|